Mechanical friction joints, SH bushings

Contact Now

The SH bushing is designed for heavy loads, for both torque and axial forces. Accurate finish machining and narrow tolerances for hub and shaft will always be needed, however. The SH-Bushing only needs a tolerance of h11-k6 on the shaft and H7-H11 in the hub.

Mechanical friction joints, SH bushings; Designs. Shafts and hubs. Transmission capacity. Mounting and dismounting. SH bushings The inner and outer components of the SH bushing are threaded to correspond to a divided taper angle.

skf SHR 75 Mechanical friction joints, SH bushings

0.0 Bearings
M06110 N/A

skf SHT 55 Mechanical friction joints, SH bushings

TIMKEN 10.1 kN
TIMKEN 0.600 mm

skf SHR 30 Mechanical friction joints, SH bushings

12MM Bore; 15MM Outs Not Applicable
0.591 Inch | 15 Mill 0.472 Inch | 12 Mill

skf SHR 140 Mechanical friction joints, SH bushings

Steel 31171504
N/A 4.724 Inch | 120 Mil

skf SHT 130 Mechanical friction joints, SH bushings

0.866 Inch | 22 Mill 1.87
Metric CN

skf SHR 32 Mechanical friction joints, SH bushings

31171504 No
No C0-Medium

skf SHR 35 Mechanical friction joints, SH bushings

Ball Bearing Double Row
124 kN Brass

skf SHT 15 Mechanical friction joints, SH bushings

Nylon 782475471553
Self Centering 3000 rpm

skf SHR 100 Mechanical friction joints, SH bushings

BOSTON GEAR 0.0
N/A 1.362

skf SHT 16 Mechanical friction joints, SH bushings

1 Rib Inner Ring and N/A
Bearing 0.0

skf SHT 17 Mechanical friction joints, SH bushings

2.625 Inch | 66.675 4.875 Inch | 123.825
3.125 Inch | 79.375 31171516

skf SHT 18 Mechanical friction joints, SH bushings

1 Piece Solid 0.0
1.689 Inch | 42.9 Mi 1.378 Inch | 35 Mill
1/6